डेवलपर्स के लिए एपीआई संदर्भ v3

शुरू करना

सिस्टम द्वारा संसाधित किए जाने वाले अनुरोधों के लिए एक एपीआई कुंजी की आवश्यकता होती है। एक बार जब उपयोगकर्ता पंजीकृत हो जाता है, तो इस उपयोगकर्ता के लिए एक एपीआई कुंजी स्वचालित रूप से उत्पन्न हो जाती है। प्रत्येक अनुरोध के साथ एपीआई कुंजी भेजी जानी चाहिए (नीचे पूरा उदाहरण देखें)। यदि एपीआई कुंजी नहीं भेजी गई है या समाप्त हो गई है, तो एक त्रुटि होगी। दुरुपयोग को रोकने के लिए कृपया अपनी एपीआई कुंजी को गुप्त रखना सुनिश्चित करें।

प्रमाणीकरण

एपीआई प्रणाली के साथ प्रमाणित करने के लिए, आपको प्रत्येक अनुरोध के साथ अपनी एपीआई कुंजी को प्राधिकरण टोकन के रूप में भेजने की आवश्यकता है। आप नीचे नमूना कोड देख सकते हैं।

curl --location --request POST 'https://url.sg/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \ 
$curl = curl_init();
curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/url/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
    "Authorization: Bearer YOURAPIKEY",
    "Content-Type: application/json",
    ),
));

$response = curl_exec($curl);
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://url.sg/api/account',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: ''
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
कीमत सीमा

हमारे एपीआई में इसकी स्थिरता को अधिकतम करने के अनुरोधों में स्पाइक के खिलाफ सुरक्षा के लिए एक दर सीमक है। हमारी दर सीमा वर्तमान में 30 अनुरोध प्रति 1 मिनट पर सीमित है।

प्रतिक्रिया के साथ कई हेडर भेजे जाएंगे और अनुरोध के बारे में विभिन्न जानकारी निर्धारित करने के लिए इनकी जांच की जा सकती है।

X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP
रिस्पांस हैंडलिंग

सभी एपीआई प्रतिक्रिया डिफ़ॉल्ट रूप से JSON प्रारूप में लौटा दी जाती है। इसे प्रयोग करने योग्य डेटा में बदलने के लिए, भाषा के अनुसार उपयुक्त फ़ंक्शन का उपयोग करने की आवश्यकता होगी। PHP में, फ़ंक्शन json_decode() का उपयोग डेटा को किसी ऑब्जेक्ट (डिफ़ॉल्ट) या एक सरणी में परिवर्तित करने के लिए किया जा सकता है (दूसरे पैरामीटर को सत्य पर सेट करें)। त्रुटि कुंजी की जांच करना बहुत महत्वपूर्ण है क्योंकि इससे यह जानकारी मिलती है कि कोई त्रुटि हुई या नहीं। आप हेडर कोड भी देख सकते हैं।

{
    "error": 1,
    "message": "An error ocurred"
}

Account

Get Account
GET https://url.sg/api/account

To get information on the account, you can send a request to this endpoint and it will return data on the account.

curl --location --request GET 'https://url.sg/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://url.sg/api/account',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "data": {
        "id": 1,
        "email": "[email protected]",
        "username": "sampleuser",
        "avatar": "https:\/\/domain.com\/content\/avatar.png",
        "status": "pro",
        "expires": "2022-11-15 15:00:00",
        "registered": "2020-11-10 18:01:43"
    }
}
Update Account
PUT https://url.sg/api/account/update

To update information on the account, you can send a request to this endpoint and it will update data on the account.

curl --location --request PUT 'https://url.sg/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "email": "[email protected]",
    "password": "newpassword"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/account/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'email' => '[email protected]',
  'password' => 'newpassword',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://url.sg/api/account/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "email": "[email protected]",
    "password": "newpassword"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "message": "Account has been successfully updated."
}

अभियान

List Campaigns
GET https://url.sg/api/campaigns?limit=2&page=1

To get your campaigns via the API, you can use this endpoint. You can also filter data (See table for more info).

पैरामीटरविवरण
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://url.sg/api/campaigns?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/campaigns?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://url.sg/api/campaigns?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "campaigns": [
            {
                "id": 1,
                "name": "Sample Campaign",
                "public": false,
                "rotator": false,
                "list": "https:\/\/domain.com\/u\/admin\/list-1"
            },
            {
                "id": 2,
                "domain": "Facebook Campaign",
                "public": true,
                "rotator": "https:\/\/domain.com\/r\/test",
                "list": "https:\/\/domain.com\/u\/admin\/test-2"
            }
        ]
    }
}
एक अभियान बनाएं
POST https://url.sg/api/campaign/add

A campaign can be added using this endpoint.

पैरामीटरविवरण
name (optional) Campaign name
slug (optional) Rotator Slug
public (optional) Access
curl --location --request POST 'https://url.sg/api/campaign/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/campaign/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'New Campaign',
  'slug' => 'new-campaign',
  'public' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://url.sg/api/campaign/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "id": 3,
    "domain": "New Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/new-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/new-campaign-3"
}
POST https://url.sg/api/campaign/:campaignid/assign/:linkid

A short link can be assigned to a campaign using this endpoint. The endpoint requires the campaign ID and the short link ID.

curl --location --request POST 'https://url.sg/api/campaign/:campaignid/assign/:linkid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/campaign/:campaignid/assign/:linkid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://url.sg/api/campaign/:campaignid/assign/:linkid',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "message": "Link successfully added to the campaign."
}
अभियान अपडेट करें
PUT https://url.sg/api/campaign/:id/update

To update a campaign, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

पैरामीटरविवरण
name (required) Campaign name
slug (optional) Rotator Slug
public (optional) Access
curl --location --request PUT 'https://url.sg/api/campaign/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/campaign/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'Twitter Campaign',
  'slug' => 'twitter-campaign',
  'public' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://url.sg/api/campaign/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "id": 3,
    "domain": "Twitter Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/twitter-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/twitter-campaign-3"
}
Delete Campaign
DELETE https://url.sg/api/campaign/:id/delete

To delete a campaign, you need to send a DELETE request.

curl --location --request DELETE 'https://url.sg/api/campaign/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/campaign/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://url.sg/api/campaign/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "message": "Campaign has been deleted successfully."
}

कस्टम स्पलैश

List Custom Splash
GET https://url.sg/api/splash?limit=2&page=1

To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).

पैरामीटरविवरण
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://url.sg/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/splash?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://url.sg/api/splash?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "splash": [
            {
                "id": 1,
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "name": "Product 2 Promo",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

क्यूआर कोड

List QR codes
GET https://url.sg/api/qr?limit=2&page=1

To get your QR codes via the API, you can use this endpoint. You can also filter data (See table for more info).

पैरामीटरविवरण
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://url.sg/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/qr?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://url.sg/api/qr?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "qrs": [
            {
                "id": 2,
                "link": "https:\/\/url.sg\/qr\/a2d5e",
                "scans": 0,
                "name": "Google",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "link": "https:\/\/url.sg\/qr\/b9edfe",
                "scans": 5,
                "name": "Google Canada",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}
Get a single QR Code
GET https://url.sg/api/qr/:id

To get details for a single QR code via the API, you can use this endpoint.

curl --location --request GET 'https://url.sg/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/qr/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://url.sg/api/qr/:id',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "details": {
        "id": 1,
        "link": "https:\/\/url.sg\/qr\/b9edfe",
        "scans": 5,
        "name": "Google Canada",
        "date": "2020-11-10 18:00:25"
    },
    "data": {
        "clicks": 1,
        "uniqueClicks": 1,
        "topCountries": {
            "Unknown": "1"
        },
        "topReferrers": {
            "Direct, email and other": "1"
        },
        "topBrowsers": {
            "Chrome": "1"
        },
        "topOs": {
            "Windows 10": "1"
        },
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "instagram": 0
        }
    }
}
Create a QR Code
POST https://url.sg/api/qr/add

To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

पैरामीटरविवरण
type (required) text | vcard | link | email | phone | sms | wifi
data (required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background (optional) RGB color e.g. rgb(255,255,255)
foreground (optional) RGB color e.g. rgb(0,0,0)
logo (optional) Path to the logo either png or jpg
curl --location --request POST 'https://url.sg/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/qr/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'link',
  'data' => 'https://google.com',
  'background' => 'rgb(255,255,255)',
  'foreground' => 'rgb(0,0,0)',
  'logo' => 'https://site.com/logo.png',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://url.sg/api/qr/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "id": 3,
    "link": "https:\/\/url.sg\/qr\/a58f79"
}
Update QR Code
PUT https://url.sg/api/qr/:id/update

To update a QR Code, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

पैरामीटरविवरण
data (required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background (optional) RGB color e.g. rgb(255,255,255)
foreground (optional) RGB color e.g. rgb(0,0,0)
logo (optional) Path to the logo either png or jpg
curl --location --request PUT 'https://url.sg/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/qr/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'link',
  'data' => 'https://google.com',
  'background' => 'rgb(255,255,255)',
  'foreground' => 'rgb(0,0,0)',
  'logo' => 'https://site.com/logo.png',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://url.sg/api/qr/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "message": "QR has been updated successfully."
}
Delete a QR Code
DELETE https://url.sg/api/qr/:id/delete

To delete a QR code, you need to send a DELETE request.

curl --location --request DELETE 'https://url.sg/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/qr/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://url.sg/api/qr/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "message": "QR Code has been deleted successfully."
}

चैनल

List Channels
GET https://url.sg/api/channels?limit=2&page=1

To get your channels via the API, you can use this endpoint. You can also filter data (See table for more info).

पैरामीटरविवरण
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://url.sg/api/channels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/channels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://url.sg/api/channels?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "channels": [
            {
                "id": 1,
                "name": "Channel 1",
                "description": "Description of channel 1",
                "color": "#000000",
                "starred": true
            },
            {
                "id": 2,
                "name": "Channel 2",
                "description": "Description of channel 2",
                "color": "#FF0000",
                "starred": false
            }
        ]
    }
}
List Channel Items
GET https://url.sg/api/channel/:id?limit=1&page=1

To get items in a select channels via the API, you can use this endpoint. You can also filter data (See table for more info).

पैरामीटरविवरण
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://url.sg/api/channel/:id?limit=1&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/channel/:id?limit=1&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://url.sg/api/channel/:id?limit=1&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "items": [
            {
                "type": "links",
                "id": 1,
                "title": "My Sample Link",
                "preview": "https:\/\/google.com",
                "link": "https:\/\/url.sg\/google",
                "date": "2022-05-12"
            },
            {
                "type": "bio",
                "id": 1,
                "title": "My Sample Bio",
                "preview": "https:\/\/url.sg\/mybio",
                "link": "https:\/\/url.sg\/mybio",
                "date": "2022-06-01"
            }
        ]
    }
}
एक चैनल बनाएं
POST https://url.sg/api/channel/add

A channel can be added using this endpoint.

पैरामीटरविवरण
name (required) Channel name
description (optional) Channel description
color (optional) Channel badge color (HEX)
starred (optional) Star the channel or not (true or false)
curl --location --request POST 'https://url.sg/api/channel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/channel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'New Channel',
  'description' => 'my new channel',
  'color' => '#000000',
  'starred' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://url.sg/api/channel/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "id": 3,
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}
Assign an Item to a Channel
POST https://url.sg/api/channel/:channelid/assign/:type/:itemid

An item can be assigned to any channel by sending a request with the channel id, item type (links, bio or qr) and item id.

पैरामीटरविवरण
:channelid (required) Channel ID
:type (required) links or bio or qr
:itemid (required) Item ID
curl --location --request POST 'https://url.sg/api/channel/:channelid/assign/:type/:itemid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/channel/:channelid/assign/:type/:itemid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://url.sg/api/channel/:channelid/assign/:type/:itemid',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "message": "Item successfully added to the channel."
}
चैनल अपडेट करें
PUT https://url.sg/api/channel/:id/update

To update a channel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

पैरामीटरविवरण
name (optional) Channel name
description (optional) Channel description
color (optional) Channel badge color (HEX)
starred (optional) Star the channel or not (true or false)
curl --location --request PUT 'https://url.sg/api/channel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/channel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'Acme Corp',
  'description' => 'channel for items for Acme Corp',
  'color' => '#FFFFFF',
  'starred' => false,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://url.sg/api/channel/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "message": "Channel has been updated successfully."
}
Delete Channel
DELETE https://url.sg/api/channel/:id/delete

To delete a channel, you need to send a DELETE request. All items will be unassigned as well.

curl --location --request DELETE 'https://url.sg/api/channel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/channel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://url.sg/api/channel/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "message": "Channel has been deleted successfully."
}

पिक्सल

List Pixels
GET https://url.sg/api/pixels?limit=2&page=1

To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).

पैरामीटरविवरण
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://url.sg/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/pixels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://url.sg/api/pixels?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "pixels": [
            {
                "id": 1,
                "type": "gtmpixel",
                "name": "GTM Pixel",
                "tag": "GA-123456789",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "twitterpixel",
                "name": "Twitter Pixel",
                "tag": "1234567",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}
Create a Pixel
POST https://url.sg/api/pixel/add

A pixel can be created using this endpoint. You need to send the pixel type and the tag.

पैरामीटरविवरण
type (required) gtmpixel | gapixel | fbpixel | adwordspixel | linkedinpixel | twitterpixel | adrollpixel | quorapixel | pinterest | bing | snapchat | reddit | tiktok
name (required) Custom name for your pixel
tag (required) The tag for the pixel
curl --location --request POST 'https://url.sg/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/pixel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'gtmpixel',
  'name' => 'My GTM',
  'tag' => 'GTM-ABCDE',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://url.sg/api/pixel/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "id": 1
}
पिक्सेल अपडेट करें
PUT https://url.sg/api/pixel/:id/update

To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

पैरामीटरविवरण
name (optional) Custom name for your pixel
tag (required) The tag for the pixel
curl --location --request PUT 'https://url.sg/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/pixel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'My GTM',
  'tag' => 'GTM-ABCDE',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://url.sg/api/pixel/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "message": "Pixel has been updated successfully."
}
Delete Pixel
DELETE https://url.sg/api/pixel/:id/delete

To delete a pixel, you need to send a DELETE request.

curl --location --request DELETE 'https://url.sg/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/pixel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://url.sg/api/pixel/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "message": "Pixel has been deleted successfully."
}

ब्रांडेड डोमेन

List Branded Domains
GET https://url.sg/api/domains?limit=2&page=1

To get your branded domains via the API, you can use this endpoint. You can also filter data (See table for more info).

पैरामीटरविवरण
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://url.sg/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/domains?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://url.sg/api/domains?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "domains": [
            {
                "id": 1,
                "domain": "https:\/\/domain1.com",
                "redirectroot": "https:\/\/rootdomain.com",
                "redirect404": "https:\/\/rootdomain.com\/404"
            },
            {
                "id": 2,
                "domain": "https:\/\/domain2.com",
                "redirectroot": "https:\/\/rootdomain2.com",
                "redirect404": "https:\/\/rootdomain2.com\/404"
            }
        ]
    }
}
Create a Branded Domain
POST https://url.sg/api/domain/add

A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.

पैरामीटरविवरण
domain (required) Branded domain including http or https
redirectroot (optional) Root redirect when someone visits your domain
redirect404 (optional) Custom 404 redirect
curl --location --request POST 'https://url.sg/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/domain/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'domain' => 'https://domain1.com',
  'redirectroot' => 'https://rootdomain.com',
  'redirect404' => 'https://rootdomain.com/404',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'POST',
    'url': 'https://url.sg/api/domain/add',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "id": 1
}
डोमेन अपडेट करें
PUT https://url.sg/api/domain/:id/update

To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

पैरामीटरविवरण
redirectroot (optional) Root redirect when someone visits your domain
redirect404 (optional) Custom 404 redirect
curl --location --request PUT 'https://url.sg/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/domain/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'redirectroot' => 'https://rootdomain-new.com',
  'redirect404' => 'https://rootdomain-new.com/404',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'PUT',
    'url': 'https://url.sg/api/domain/:id/update',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    body: JSON.stringify({
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}),
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "message": "Domain has been updated successfully."
}
Delete Domain
DELETE https://url.sg/api/domain/:id/delete

To delete a domain, you need to send a DELETE request.

curl --location --request DELETE 'https://url.sg/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/domain/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'DELETE',
    'url': 'https://url.sg/api/domain/:id/delete',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": 0,
    "message": "Domain has been deleted successfully."
}

लिंक


सीटीए ओवरले

List CTA Overlays
GET https://url.sg/api/overlay?limit=2&page=1

To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).

पैरामीटरविवरण
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://url.sg/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://url.sg/api/overlay?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
var request = require('request');
var options = {
    'method': 'GET',
    'url': 'https://url.sg/api/overlay?limit=2&page=1',
    'headers': {
        'Authorization': 'Bearer YOURAPIKEY',
        'Content-Type': 'application/json'
    },
    
};
request(options, function (error, response) {
    if (error) throw new Error(error);
    console.log(response.body);
});
सर्वर प्रतिक्रिया
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "cta": [
            {
                "id": 1,
                "type": "message",
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "contact",
                "name": "Contact Page",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}